JDE-42

Introducing our premium UV-DTF cup wraps designed 16oz libby glass/acrylic tumblers, (does not include tumbler). 

🚨 The longevity of your decal depends on the care it receives. 
- Gentle hand wash in warm soapy water is suggested.

Exclusive wrap designs are NOT to be re-sold in anyway. Eg: live wrap sales or website sales.

KEY FEATURES:

🌟 Waterproof (not recommended for dishwasher)

🌟Scratch proof

🌟 Ideal for smooth, hard surfaces such as glass, metal, acrylic and select powder-coated surfaces. We suggest to apply additional pressure during the rubbing down process during application.

APPLICATION PROCESS:

- Thoroughly clean your surface with a clean cloth and allow to fully dry. 
- Centre the wrap and wrap around the tumbler to align both ends of the wrap.

- Once centred, apply a piece of tape at the top and the bottom of the wrap sticking to the tumbler to make sure the wrap stays in place.

- Peel the corner of one side of the wrap and peel about an inch of it fully off and cut that part of the backing off. Stick the exposed part of the wrap down and rub for approx 1 minute before moving on.

- Remove the tape pieces and using a squeegee, rub down the design as you peel the backing off. Go slow during this process to minimise air bubbles in your wrap.

- Once you backing has been fully removed, rub down your design for approx 2 minutes using your hands or fingers, the heat from your hands or fingers will allow the adhesive to stick a lot better.

- Remove transfer sheet carefully.

- Allow to sit for minimum 48 hours before use to allow adhesive to stick and minimise premature lifting.

🚨 Please adhere to these instructions as UV-DTF prints are ineligible for replacement or refund.

CARE INSTRUCTIONS:

🌟 Hand wash ONLY.

🌟 AVOID hard scrubbing or use of abrasive chemicals.

🌟 while UV-DTF prints do have exceptional strength and durability, excessive wear and tear or rough handling may lead to scratches and/or chipping.