Glitter Globe Elixir - Suspended Flow

-Premade snowglobe tumbler solution.

-This is a suspended flow solution which means your glitter will stay suspended inside the tumbler for a few hours. Glitter inside tumbler will setlle within few hours. 

-Simply snip the top of the bottle off to make a hole then pour into your acrylic/glass tumbler. I recomend to use chunky mix glitter mixes (i use glitter from @glittervault_nz). Sivv out as much fine glitter as possible to minimise clumping of the glitter once inside the tumbler. You can use iso alcohol (from mitre10/bunnings) to pop air bubbles. I recomend to degas for a minimum of 24hours with LOTS of shaking during this time, this allows any air stuck between the glitter around the rim of the tumbler to rise to the top and you can remove the bubble and fill with more solution. I recomend a metal tip syringe that you can bend so you can suck up the air bubble with ease and replace with solution. 

-Acrylic tumblers can be purchased from: www.glittervault.nz

-Glitter settling at either the top or the bottom or both, of the tumbler is normal. Simply shake your tumbler to activate your snowglobe. 

-For finished snowglobe tumblers, store upside down and when you go to use it just shake it. 

-Handmade in West Auckland, New Zealand.